Fuming button: the use of plastic snap button

Among the metal buttons, the plastic snap button has the widest application range, and various types of clothing, bags, handbags, shoes and hats, packaging, etc. are often used. When sewing, the garments can be replaced with buttons of different styles and colors at any time, and the fastening and opening are extremely convenient, which brings favorable conditions for washing articles such as clothes, shoes and hats. Therefore, it is widely used in jackets, casual wear, down jackets, children's wear and baby carriages. It is also especially suitable for thicker fabric items such as tents and denim.

The binding of the plastic snap fastener is mainly achieved by the function of the binding die, so that the two products that need to be combined with each other are deformed by the winding position to obtain the binding effect. However, in actual use, phenomena such as cracking of the buckle, buckle of the buckle, deformation of the buckle, and buckle of the bottom buckle often occur. Therefore, in order to achieve a satisfactory binding effect, the following points should be noted when performing the plastic snap binding:

1. There are many different types of binding machines. Different binding machines have different mounting sizes for the upper and lower molds. To this end, when ordering the binding die, the garment factory must determine the die size of the binding die according to the respective binding machine. The common die size specifications are divided into upper die 9.5mm, lower die 12.6mm and upper die 10mm, lower die. Two kinds of 12mm. In addition, the factory can also customize the binding die according to the requirements of different customers.

2. Before binding the plastic four-button to the fabric, the fabric must first take the hole. The diameter of the hole should correspond to the size of the buckle (usually about half of the diameter of the buckle).

3. When mounting the binding die to the binding machine, the concentricity of the upper and lower molds must be ensured, generally not exceeding 0.1 mm.

4, binding mold is a more sophisticated product, so when adjusting the mold, it should be loose to tight, the position can not be adjusted too tight, too deep, otherwise it may cause damage to the binding mold.

5. When the binding is performed, the position of the fabric cannot make the button placed on the lower mold skew, otherwise the binding quality may be affected.

6. As the number of bindings increases, the binding mold will wear out. For this reason, in the production process, random sampling should be carried out. When the buckles of the gas eye ring and the plastic snap button are double-circle, the binding die should be replaced in time. Otherwise, the buckle may be broken after binding. Affect the quality and appearance of the garment.

7. When the plastic snap button bead is bound with the flute, it should be ensured that the deformation of the button bead before and after the binding does not exceed 0.05mm, otherwise the buckle force may not be standard.

Fuming Button insists on quality as the center, focuses on the design and development of plastic snap fasteners, and continues to innovate based on customer needs. It has grown into the top three button companies in China. Today, our product network and overall product solution application In Europe and the United States and other countries and regions in more than 20 countries. If you are interested in us, please contact us: miller@fmbutton.com