Automatic button machine: button inspection method and requirements and standards

I believe that everyone will not be unfamiliar with the buttons, because the clothes we usually wear are button-shaped, and now the buttons are not the same as the previous buttons. The previous buttons are handmade, but now We use buttons to make tools. We don't wear only one or two buttons, but we have seven or eight buttons, but we need so many buttons for each piece of clothing. It must not be supplied by hand, so many manufacturers now choose automatic button machine to order buttons. Then we will briefly introduce the methods, requirements and standards for button inspection:

1. Control the sample or confirm the sample. See if the color and model match the sample;

2. There should be no cracks, notches, irregularities and obvious scratches on the button surface;

3, plastic buttons, no back cracks, bubbles; no bad edges, uneven thickness;

4, the pattern should be no obvious deformation, no white eyes, white circles and other phenomena;

5, buttonholes should be smooth and smooth; needles are worn and broken, to be symmetrical and without big eyes. If it is a dark eye button, the dark eye groove should be smooth and free from obvious bursts.

6, after electroplating or other process treatment, the effect should be uniform, if some special effects can not be consistent, can be packaged separately.

7. The color difference of the same batch of buttons should not be lower than the GB250 level 4 standard. Compared with the sample, it should not be lower than the GB250 level 3 standard.

8, packaging inspection, after the appearance inspection / customer requirements performance test all qualified, and then sub-package. A certificate or other label should be placed when packaging. The quantity of the package shall be in accordance with the regulations, and the actual quantity of each bag shall be in accordance with the specified quantity. If it is found that the thickness is different or the reason exceeds the tolerance, the full inspection shall be carried out.

9, emergency button / hood button / five-prong button to test the performance and availability of the button before shipment, with a fully automatic button machine and provide proofing and test samples to customers.

Fuming Button insists on quality as the center, focuses on the design and development of plastic snap fasteners, and continues to innovate based on customer needs. It has grown into the top three button companies in China. Today, our product network and overall product solution application In Europe and the United States and other countries and regions in more than 20 countries. If you are interested in us, please contact us: miller@fmbutton.com