Fuming+0086-769-85604312

EN

JP CN

industry news

Home / industry news

Points to be aware of when using a fully automatic button machine

What are the points to be aware of when using the automatic button machine? The automatic button machine is very popular in the society. Now, not only the button machine is fully automatic, but also many machines are fully automatic, just We don't know about this, so we don't know its usefulness. The advantage of fully automatic machine is that we don't need to have employees to watch it 24 hours a day, and its production efficiency is relatively high, but we operate Each type of machine has its own points, and the same is true for the automatic button machine. Then, let's let Fuming Xiaobian tell you the main points to be aware of when using the automatic button machine:

1. The button machine operator must be trained before going to work. Only qualified personnel can operate, and work in strict accordance with the safety operation system and quality technical requirements, and operate the automatic buckle machine.

2. Careful maintenance before work, check for abnormalities such as looseness in various parts, whether the safety device is reliable, whether the mold and the inner sleeve are loose, and whether the main shaft and the rotating part are lubricated.

Points to be aware of when using a fully automatic button machine

3. check the quality of the buckle of the buckle machine every day, whether it is loose, too tight and offset, and record and physical record.

4. When the button machine is turned on, the fingers and clothes should be removed from the mold working area to prevent the clutch from being combined and injured. When there is no riveting button, the automatic car buckle machine cannot be used.

5. It is strictly forbidden to work without insurance during work! It is forbidden to operate two machines at the same time! Be highly focused on your work and don't talk to others to avoid distraction.

Sixth, the mold installation should be close and reliable, and concentric. The riveting gap is adjusted by the upper die and the high point downwards to prevent the top cow from damaging the machine. The mold must meet the quality requirements and the material is tight.

7. Turn off the power when adjusting the machine and troubleshooting. Clean the machine and keep the materials and turn off the power when you are off work.

Fuming Button insists on quality as the center, focuses on the design and development of plastic snap fasteners, and continues to innovate based on customer needs. It has grown into the top three button companies in China. Today, our product network and overall product solution application In Europe and the United States and other countries and regions in more than 20 countries. If you are interested in us, please contact us: miller@fmbutton.com